Smok Pen – How to Change the Coil and Change the Flavour
The Smok Pen is fairly the interesting new electronic writing device. It is just a pen that you can use to write on paper along with draw on with a pen or your finger. But it does so much more. It is possible to control its temperature, and you are able to utilize it to spray an elixir of e-liquid. This article will show you how to change your Smok Pen into an amazing vaporizer.
The body of the Smok Pen is made out of a durable stainless steel. That is what makes it so nice and sturdy. However, the body of this vaporizer is covered in a fabric material that’s not heat sensitive. So it’s perfect for anyone that may be allergic to heat. It also works great if you are using it on a cold day. If you are using it outside for long periods of time, then you should consider getting a model that has a built-in compressor.
The very best of the Smok Pen is constructed out of black silicone material. When you place the pen onto its heating element, it heats up the outer skin of the silicone which causes it to expand. When it does that, a small reservoir is made inside the pen’s podsmall.com body. Once you place your individual Vaporizer Pen onto the reservoir, it is possible to start vaporizing your e-liquid.
If you would like to show your Smok Pen right into a vaporizer, then you have to remove the metallic plate within the coil. On some types of Smok Pens, the plate covering the coil is located between your tank and your body. Other models will have the plate on the bottom. If you have a genuine Smok Pen, then removing the plate will never be easy at all. Many people have reported that they have difficulty removing the plates, and sometimes, they even find yourself damaging their pen.
In case you have a genuine Smok Pen, you then should go ahead and remove the metal plate covering the coil. The reason being the coil will be linked to a little metal sub-ohm tank. If you don’t remove the plate, then your e-liquids that are stored within it will begin to heat up. At these times, the e-liquids risk turning into vapor instead of turning into liquid, and you also risk getting burned.
Once you have removed the metallic cover, then you can certainly access the two screws that are holding down the body of one’s Smok Pen. Carefully take away the screws, and then carefully remove the metal sub-ohm tank from the pen. It’s important that you place your hands under the Smok Pen, as it is incredibly hot. Many papers have reported that they burned their hand if they were attempting to unscrew the tank. When you have placed your hands beneath the pen, then turn on the battery and put it in the “fire” mode. It’s important that you do not turn on the pen as the battery is in the “fire” mode, as the battery may start to obtain hot.
From then on, carefully pull the pen’s head from the coil. You will then need to take away the entire coil from the bottom of the pen, which will create a tight space where you can replace the coil. Carefully insert the brand new coil into the space. Ensure that you follow all of the instructions, and that you align the brand new coil very much the same because the old one was aligned. You’ll then turn on the pen and apply the airflow control switch to create the airflow. If you follow these instructions carefully, you then will not have a problem with your new airflow device.
If you have finished replacing the coil, you will have to reconnect the battery to the electrical circuit board. Your smok vaporizer will now be ready again to use, and if you love it, you’ll benefit from the new airflow, and the wonderful flavours that it brings. In the event that you feel that you want to buy your own flavours, you should find out which flavours are available in the Smok Pen selection of e-liquids.